Calendario

Enero 2016
LunMarMierJueVierSabDom
 << <Oct 2017> >>
    123
45678910
11121314151617
18192021222324
25262728293031

Anuncio

¿Quién está en línea?

Miembro: 0
Visitante: 1

rss Sindicación

Anuncio de los artículos posteados en: Enero 2016

En292016

separation

How can I avoid divorce?


separation - Divorce is a traumatic experience for all concerned. Have you truly tried everything you could to keep your marriage together?


Do you think you are at the point of wanting a divorce? I was, how do you know if its time to throw in the towel and file? Or can I save my marriage.


At one time you really loved your spouse and shared many happy and joyful times together. What happened? This web site was created to share my experiences and to help people who are in a troubled marriage find hope and guidance and hopefully help them avoid divorce.

Admin · 25 vistas · Escribir un comentario
En282016

What Are Solar Panels?

green energy - The sun's rays could be the primary source of energy on the planet and sunlight might be converted into electricity using solar panels. Electricity is now indispensable in your life. It powers the machines that many us use daily.


So, what exactly are solar panel systems? What if you could make your own personal?


In this article, we are going to show you a simple way of building your own personal functional solar power.


The parts


A screen is normally produced from six (6) components namely the PV (photovoltaic) cell or solar cell which generates the facility, the glass supplies and protects the solar cells, the frame which gives rigidity, the backsheet where the solar cells are laid, the junction box the location where the wirings are enclosed and connected, as well as the encapsulant which is adhesives.


Because most people doesn't need usage of equipment in manufacturing solar power systems, it is important to note and understand those six components in order for one to have the ability to plan materials needed to develop a do-it-yourself or home-made solar panel.


The types of materials needed on how to come up with a solar panel should be available for sale locally or web should not exceed the expense of a new screen or doesn't take a long time to construct.


1.) PV Cell


Think about consider when building your own solar panel is the solar cell.


Photovoltaic (PV) cell or solar panel converts visible light into electricity. One (1) solar panel however is just not enough to make a usable amount of electricity such as microbot in Baymax (Hero 6) which only becomes useful when combined as being a group. This basic unit generates a DC (household power) voltage of 0.5 to at least one volt and although that is reasonable, the voltage remains too small for most applications. To make a useful DC voltage, the solar panels are connected in series then encapsulated in modules making the solar panel. If a person cell generates 0.5 volt and is also associated with another cell in series, the above cells should then have the ability to produce 1 volt and they are able to be referred to as a module. A standard module usually contains 28 to 36 cells in series. A 28-cell module should be able to produce roughly 14 volts (28 x 0.5 = 14VDC) which is enough to charge a 12V battery or power 12V devices.


Connecting 2 or more solar panels require that you've got a basic comprehension of series and parallel connection which has similarities to connecting batteries to make up battery power storage system.


There's 2 most frequent cells that can be purchased available in the market; a monocrystalline cell plus a polycrystalline cell. These two may have the same size, 156mm x 156mm, nevertheless the main difference would be efficiency. You should purchase additional cells to serve as backup just in case you fail on some of the cells i.e. bad solder, broken cell, scratched, etc.


Monocrystalline solar cells are usually black and octagonal fit. Such a solar panel is made of the greatest and purest grade silicon which makes them expensive. But they are the best of all of solar cells and are more often than not the option of solar contractors when space is a crucial factor to look into in having this power they want to attain according to their solar system design.


Polycrystalline PV Cells are characterized by their bluish color and rectangular shape. These cells are produced within a much simpler process which lowers the purity with the silicon content plus lowers the efficiency in the result.


Generally, monocrystalline cells are more efficient than polycrystalline cells however does not mean that monocrystalline cells perform and outputs more power than polycrystalline cells. Solar cell efficiency has something connected to the size of cellular structure every solar power or cells offer an efficiency rating depending on standard tests after they were manufactured. This rating is usually in percentage along with the common values cover anything from 15% to 20%.


2.) Glass


The glass protects the Electricity cells while allowing optimal sunlight to pass through. These are generally made of anti-reflective materials. Tempered glass may be the choice of material nowadays for unknown and new manufacturers nevertheless, there are still those that utilize flat plate glass on their own solar power panels. Tempered glass are made by chemical or thermal means and it is many times stronger than plate glass making it higher priced to produce but the expense of manufacturing them today is reasonable and cost-effective. Flat plate glass creates sharp and long shards when broken instead of tempered glass which shatters safely in small pieces upon impact, that is why they also think of it as safety glass. It should be noted here that a lot of amorphous solar panels uses flat plate glass because of the way the panel is made.


Tempered glass is what manufacturers utilization in mass producing their solar power systems. In your DIY project, we suggest to use Plexiglas otherwise known as acrylic glass which can be safer compared to the regular normal glass from your local hardware store. It is a bit expensive than regular glass but is weather resistant and will not break easily. The Plexiglas may also be screwed or glued easily for the frame.


3.) Frame


A frame is normally created from anodized aluminum which offers structure and rigidity for the solar module. These aluminum frames may also be meant to be works with most solar mounting systems and grounding equipment for straightforward and safe installation on a roof or on a lawn.


The frame within a factory-built cell is generally the aluminum part where all four sides of the screen sheet are inserted. Think of it as a skeletal rectangular frame. The screen sheet in addition is composed of the other 4 components and so are layered and laminated inside the following order throughout; the tempered glass, top encapsulant, the solar panels, bottom encapsulant, then this backsheet. Inside our DIY solar panel, we are using a wooden frame as well as the end-result can be something analogous to a picture frame the location where the picture will be the solar panels glued with a non-conductive board, the glass for that Plexiglas top cover, and also the wooden part since the frame and backsheet.


4.) Backsheet


The backsheet could be the layer of plastic film on the back surface of the module. Here is the only layer protecting the module from unsafe DC voltage. The primary purpose of the backsheet is always to insulate and protect the handler from shock and supply the safest, efficient, and dependable electrical conductivity possible.


The backsheet is a wooden plywood where the frame will probably be screwed on the top and also on the sides. It needs to be noted here that the perforated hardboard (Pegboard) will be utilized to place and align the Solar cells which Pegboard will lay on top of the wooden backsheet and fitted within the wooden frame.


5.) Junction Box


The junction box is the place the terminal wires and bypass diodes are situated and concealed. The terminal wires are merely the good and bad wires based on the series connections from the Electricity cells and is connected to another solar panel, electrical controller, an assortment system, in order to an inverter, with respect to the system design. The bypass diode can be a protective mechanism that prevent power from okay the cell if it's not producing electricity as in true if it is evening.


You'll find junction boxes suitable for factory-built solar power panels which are available these days to acquire online especially from China. If you are not tight on time, you can order web wait for the delivery otherwise you can just purchase a regular electrical junction box out of your local hardware store. The purpose of the junction box is always to protect the terminals (positive and negative terminals) from water, dust, and also other elements. This can be in which the two wires (red for positive and black for negative) will be coming from. The other end present in wires can even be protected by employing a PV accessory called MC4 which could be purchased online along with the PV junction box.


6.) Encapsulant


Encapsulant sheets prevent water and dirt from infiltrating the solar modules and serve as shock-absorbers that protect the PV cells. They've got this adhesive bonding capacity to the glass, the PV cells, along with the backsheet such as a glue but stronger. Encapsulants are often manufactured from Ethylene-Vinyl Acetate or EVA and they are applied using lamination machines and procedures. Solar panel manufacturers use a vacuum as well as a large oven to properly seal and cure the EVA sheet onto the solar power panels. Most of us do not have the ability to try this however, many continue to have tried without success while others had varying numbers of success.


Encapsulants are thin plastic sheets that are usually laminated at the top and bottom parts of the solar cell sheet. The bottom encapsulant may be the layer over the backsheet the location where the cells are in fact placed and supported. Inside our project, we are going to instead work with a latex acrylic paint. This paint won't be put on the pv cells because when attempted, won't lead to an equal distribution or use of the liquid for the top of the cells which may degrade performance. The paint will probably be put on the wooden frame, wooden backsheet, and to the Pegboard. This Latex Acrylic paint are able to protect the wooden parts from UV rays and can better resist blistering and cracking overtime. This paint, although water-soluble, can dry quickly and becomes water-resistant.

Admin · 27 vistas · Escribir un comentario
En282016

Stop foreclosure San Antonio Texas

Stop foreclosure San Antonio Texas - Need to sell your house fast? We buy houses fast in San Antonio TX area. Need to stop or avoid foreclosure? Do you need to sell your inherited or probate property? We provide quick debt relief and mortage relief. Call Now


210-693-1533

Admin · 26 vistas · Escribir un comentario
En272016

dragon tattoo designs

tatoos - In ancient caverns, archeologists have found drawings of dragons. This draw for the dragon has carried on definitely the most requested tat design, till the present day making dragon tattoo designs. If you're intending to get a dragon tattoos

Admin · 27 vistas · Escribir un comentario
En272016

Buxkor

Buxkor - Buxkor is a newly opened business. Our offices are in Houston Texas and we specialize in making your life better by helping you streamline how you work and how you live. Contact Buxkor today for a free consultation on how to improve your life!

Admin · 32 vistas · Escribir un comentario

1, 2, 3 ... 9, 10, 11  Página siguiente